For a list of all currently documented Atheros chipsets with specifications, see Atheros.
N900 Wireless Dual Band Gigabit Router
Product page
Firmware Interface
Downloads
CPU clock speed up to 800MHz (Freescale Semiconductor QorIQ P1014)
Hardware NAT acceleration w/ AR8327N switch (.. but not currently, or likely anytime soon, with OpenWrt)
On the OpenWrt forums
OpenWrt boot log posted by Gabor Juhos
P1014 @ 800MHz (P1014RDB board), 128MB DRAM, 168c:abcd (hm.) and 168c:0033 (AR9580) PCI IDs
On the OpenWrt wiki
There would appear to be two versions of the device..
v1 - worldwide version, Freescale based
F8:1A:67 OUI, per the censored label
"2050500289" and "Rev:1.0" is silkscreened on the board.
changeset (r36051) adding profile build image for the device
v2 - China only, QCA QCA9558 based
v2 on the OpenWrt forums
Review on redeszone.net (ES) (w/ excellent internal photos)
De-heatsinkized CPU visible as a Freescale P1014NSN5HFA (P1014) - not a P1010.. but there does not appear to be anything significantly different between the two models (P1010 appears to have 3x GbE SGMII [vs. P1014's 2x) and trusted boot support)
WiFi chips visible in their photos as AR9580 (AR9580-AR1A) and AR9381
USB 2.0 hub (P1014 has only 1x USB 2.0) is a Genesys Logic GL850G
"2050500289" and "Rev:1.0" is silkscreened on the board.
Review on uk.hardware.info
specifies WiFi chips as AR9385 (no) and AR9381 Per TP-LINK's specs...
EIRP: < 20dBm
Receiver sensitivity
2.4GHz
450Mbps: -71dBm
300Mbps: -71dBm
270Mbps: -71dBm
195Mbps: -72dBm
130Mbps: -74dBm
54Mbps: -78dBm
6Mbps: -94dBm
5GHz
450Mbps: -66dBm
405Mbps: -66dBm (300Mbps??)
270Mbps: -67dBm
195Mbps: -70dBm
130Mbps: -73dBm
54Mbps: -75dBm
6Mbps: -90dBm
TP-LINK TL-WDR4900 v1 (Est.) release date: 2013
Country of manuf.: China Type: wireless router
FCC ID: TE7WDR4900
Industry Canada ID: 8853A-WDR4900
Power: 12 VDC, 2.5 A
Connector type: barrel CPU1: Freescale Semiconductor P1014 (800 MHz)
FLA1: 16 MB (Spansion FL128SAIF00)
RAM1: 128 MB (Hynix H5TQ1G63DFR-H9C)
Expansion IF types: USB 2.0
USB ports: 2 WI1 chip1: Atheros AR9580
WI1 802dot11 protocols: an
WI1 MIMO status: 3x3:3
WI1 antenna connector: RP-SMA
WI2 chip1: Atheros AR9381
WI2 802dot11 protocols: bgn
WI2 MIMO status: 3x3:3
WI2 antenna connector: none ETH chip1: Freescale Semiconductor P1014
Switch: Atheros AR8327N
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1 abgn
Third party firmware supported: OpenWrt, DD-WRT
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 423 additional devices
of which 18 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 611 additional devices
of which 91 are TP-LINK devices
802dot11 OUI: A0:F3:C1 (4 E, 4 W, 2013), F8:1A:67 (2 E, 2 W, 2013)
Ethernet OUI: A0:F3:C1 (4 E, 4 W, 2013), F8:1A:67 (2 E, 2 W, 2013) CPU1 brand WI1 chip1 brand WI1 chip2 brand
TP-LINK TL-WDR4900 v1 Freescale Semiconductor Atheros
TP-LINK TL-WDR4900 v2 Qualcomm Atheros Qualcomm Atheros
N900 Wireless Dual Band Gigabit Router
Product page
Firmware Interface
Downloads
CPU clock speed up to 800MHz (Freescale Semiconductor QorIQ P1014)
Hardware NAT acceleration w/ AR8327N switch (.. but not currently, or likely anytime soon, with OpenWrt)
On the OpenWrt forums
OpenWrt boot log posted by Gabor Juhos
P1014 @ 800MHz (P1014RDB board), 128MB DRAM, 168c:abcd (hm.) and 168c:0033 (AR9580) PCI IDs
On the OpenWrt wiki
There would appear to be two versions of the device..
v1 - worldwide version, Freescale based
F8:1A:67 OUI, per the censored label
"2050500289" and "Rev:1.0" is silkscreened on the board.
changeset (r36051) adding profile build image for the device
v2 - China only, QCA QCA9558 based
v2 on the OpenWrt forums
Review on redeszone.net (ES) (w/ excellent internal photos)
De-heatsinkized CPU visible as a Freescale P1014NSN5HFA (P1014) - not a P1010.. but there does not appear to be anything significantly different between the two models (P1010 appears to have 3x GbE SGMII [vs. P1014's 2x) and trusted boot support)
WiFi chips visible in their photos as AR9580 (AR9580-AR1A) and AR9381
USB 2.0 hub (P1014 has only 1x USB 2.0) is a Genesys Logic GL850G
"2050500289" and "Rev:1.0" is silkscreened on the board.
Review on uk.hardware.info
specifies WiFi chips as AR9385 (no) and AR9381 Per TP-LINK's specs...
EIRP: < 20dBm
Receiver sensitivity
2.4GHz
450Mbps: -71dBm
300Mbps: -71dBm
270Mbps: -71dBm
195Mbps: -72dBm
130Mbps: -74dBm
54Mbps: -78dBm
6Mbps: -94dBm
5GHz
450Mbps: -66dBm
405Mbps: -66dBm (300Mbps??)
270Mbps: -67dBm
195Mbps: -70dBm
130Mbps: -73dBm
54Mbps: -75dBm
6Mbps: -90dBm
TP-LINK TL-WDR4900 v1 (Est.) release date: 2013
Country of manuf.: China Type: wireless router
FCC ID: TE7WDR4900
Industry Canada ID: 8853A-WDR4900
Power: 12 VDC, 2.5 A
Connector type: barrel CPU1: Freescale Semiconductor P1014 (800 MHz)
FLA1: 16 MB (Spansion FL128SAIF00)
RAM1: 128 MB (Hynix H5TQ1G63DFR-H9C)
Expansion IF types: USB 2.0
USB ports: 2 WI1 chip1: Atheros AR9580
WI1 802dot11 protocols: an
WI1 MIMO status: 3x3:3
WI1 antenna connector: RP-SMA
WI2 chip1: Atheros AR9381
WI2 802dot11 protocols: bgn
WI2 MIMO status: 3x3:3
WI2 antenna connector: none ETH chip1: Freescale Semiconductor P1014
Switch: Atheros AR8327N
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1 abgn
Third party firmware supported: OpenWrt, DD-WRT
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 423 additional devices
of which 18 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 611 additional devices
of which 91 are TP-LINK devices
802dot11 OUI: A0:F3:C1 (4 E, 4 W, 2013), F8:1A:67 (2 E, 2 W, 2013)
Ethernet OUI: A0:F3:C1 (4 E, 4 W, 2013), F8:1A:67 (2 E, 2 W, 2013) CPU1 brand WI1 chip1 brand WI1 chip2 brand
TP-LINK TL-WDR4900 v1 Freescale Semiconductor Atheros
TP-LINK TL-WDR4900 v2 Qualcomm Atheros Qualcomm Atheros
