290°C
204°C
Nylon. POM has pretty good intensity and hardness, it has been replacing some products which used to be made by metal, however when it comes to tensile, Nylon has absolutely much better tensile property.
POM has the better anti wear property.
Production and Material Control. Very popular department within manufacturing organization. As it’s name indicated, it has two major factor: PC and MC. PC mainly focuses on the planning and process control of production, and MC focuses on material planning, material requisition, material pull-in and other material control work before and during production.
PMC is of great importance because it’s related to on-time delivery, capacity arrangement, cost reduction, resources arrangement, forecast revenue, and quality control.
Both belong to aluminum alloy family. These 2 items has very close mechanical property, but differ in specific spec. 6061T6 has bigger tensile strength (42K PSI) and yield strength (35K PSI) than 6063T6(relatively 30K PSI,25K PSI). 6063T6 can be more elongated than 6061T6.
It’s a kind of heat treatment technology used mostly on metal and glass material to enhance its mechanical property such as strength and hardness.
Metal and glass are the main types of material that could be performed. Plastic barely refers to annealing technology currently but perhaps new plastic in future can use it to enhance its mechanical properties.
They are both hollowed-out block that can be filled with liquid (plastic) to shape various products. Compression mold has mold cavity that would be closed, and pressure would be applied to compress the material. Whereas the material(heated resin) is injected into the cavity. Main difference is that: Former one can mold very big parts with lower cost, compression mold wastes relatively little raw material but consistency and quality is generally worse than injection mold. Former produces fewer knit lines and less fiber-length degradation than injection molding
Similar to plastic molding: primary material is powdered namely divided into tiny particles, and would then be injected into a mold with high pressure, high temperature, long setting time to produce designed products.
Understeer is that during turning a corner, the front tires don't follow the trace the driver is trying to go, instead, following a more straight line trace. Oversteer is its opposite.
Recycle plastic is plastic that can be reused after reprocessing or recovering. Advantage is that it could reduce the use of plastic which could save the use of its raw material-petroleum, it could also reduce waste and sometimes are cost-efficient than flesh new plastic.
Disadvantage is its relatively poor mechanical and chemical properties because melted plastic are of several different kinds of plastic, and the widespread use of dyes, fillers, and other additives in plastics.
204°C
Nylon. POM has pretty good intensity and hardness, it has been replacing some products which used to be made by metal, however when it comes to tensile, Nylon has absolutely much better tensile property.
POM has the better anti wear property.
Production and Material Control. Very popular department within manufacturing organization. As it’s name indicated, it has two major factor: PC and MC. PC mainly focuses on the planning and process control of production, and MC focuses on material planning, material requisition, material pull-in and other material control work before and during production.
PMC is of great importance because it’s related to on-time delivery, capacity arrangement, cost reduction, resources arrangement, forecast revenue, and quality control.
Both belong to aluminum alloy family. These 2 items has very close mechanical property, but differ in specific spec. 6061T6 has bigger tensile strength (42K PSI) and yield strength (35K PSI) than 6063T6(relatively 30K PSI,25K PSI). 6063T6 can be more elongated than 6061T6.
It’s a kind of heat treatment technology used mostly on metal and glass material to enhance its mechanical property such as strength and hardness.
Metal and glass are the main types of material that could be performed. Plastic barely refers to annealing technology currently but perhaps new plastic in future can use it to enhance its mechanical properties.
They are both hollowed-out block that can be filled with liquid (plastic) to shape various products. Compression mold has mold cavity that would be closed, and pressure would be applied to compress the material. Whereas the material(heated resin) is injected into the cavity. Main difference is that: Former one can mold very big parts with lower cost, compression mold wastes relatively little raw material but consistency and quality is generally worse than injection mold. Former produces fewer knit lines and less fiber-length degradation than injection molding
Similar to plastic molding: primary material is powdered namely divided into tiny particles, and would then be injected into a mold with high pressure, high temperature, long setting time to produce designed products.
Understeer is that during turning a corner, the front tires don't follow the trace the driver is trying to go, instead, following a more straight line trace. Oversteer is its opposite.
Recycle plastic is plastic that can be reused after reprocessing or recovering. Advantage is that it could reduce the use of plastic which could save the use of its raw material-petroleum, it could also reduce waste and sometimes are cost-efficient than flesh new plastic.
Disadvantage is its relatively poor mechanical and chemical properties because melted plastic are of several different kinds of plastic, and the widespread use of dyes, fillers, and other additives in plastics.
