1. The pretreatment base must be smooth and compact, dry and clean, and free of oil, dust and sundries.
2. Brush the base material once in the area to be treated. When it is still wet, spread the polyester cloth directly on it. Brush it flat with a brush to ensure that the polyester cloth does not wrinkle and is completely dry. Brush the next waterproof paint once every time, at intervals of more than 4 hours. Depending on the thickness, it should not be too thick every time. Check the brushing area and repair the construction defects.
3. Coverage rate of single layer is 35 square/20Kg, and the dosage per square meter should be 1.6-1.8kg.
4. Product packaging is 20Kg per barrel.
5. Storage temperature above zero, prohibit sunshine exposure.
6. The shelf life of the product is 18 months.
1.预处理基层须平整密实，要求干硬洁净，不得有油污，灰尘及杂物等。
2.在需要处理的区域涂刷一遍底料，当其仍湿润时，把聚酯布直接铺于其上，用刷子将其刷平，确保聚酯布不起褶皱、完全干燥后涂刷下一遍防水涂料，每遍间隔4小时以上。需视厚度而定，每遍不宜过厚，对涂刷部位进行检查，如有施工暇疵予以修补。
3.覆盖率单层35平方/20Kg,每平方米用量应在1.6-1.8kg。
4.产品包装每桶20Kg。
5.存储温度零度以上，禁止阳光暴晒。
6.产品保质期18个月。