由于英国未能与欧盟就产品的认可达成互认协议，所以现在英国采用自己的产品安全法规体系(Product Safety Regulations).
脱欧法案Act 2018 (TheEuropean Union ( Withdrawal) Act 2018) 确保所有欧盟的指令/法规仍保留在英国的法律内，比如承压设备安全法规 2016(Pressure Equipment (Safety)Regulations 2016).
The Product Safety and Metrologyetc. (Amendment etc.) (EU Exit) Regulations 2019增补修订了这些现有的法规以便落实由于脱欧后带来的一些变化。
●关于设计
相比PED，PER在对安全性(ESR)以及其它的技术要求方面没有变化。
但是PER采用了DesignatedStandard的叫法取代PED的HarmonizedStandard的叫法.
https://www.gov.uk/guidance/designated-standards
●关于材料
从2022年1月1日起，如果沿用体系认证模式的材料生产单位，其质量体系必须取得由在英国的认证机构认证批准。
●现有库存材料的处理？
●PER 2016 Part 4: 8 –“MaterialManufacturer to have an appropriate QA system certified by a competent bodyestablished in the UK”
●关于制造 - 焊接方面
在II,III 和IV类设备上使用的永久连接(比如焊接)的程序和施工人员，必须得到英国批准的认证机构或合格第三方批准。●●PER 2016 Part 3:21.(3) (a ) & ( b) :Permanentjoining procedures & personnel for Cat II,III & IV equipment to beapproved by a UK Approved Body or UK RTPO .
●关于制造 -NDE方面
在III 和IV类设备上做NDE探伤作业的人员，必须得到英国批准的认证机构或合格第三方批准。●●PER 2016 Part 3:22: Personnelperforming NDT for permanent joints in Cat III & IV equipment to be approved by a UK ApprovedBody or UK RTPO.
●劳氏(LRV-0038)可以提供永久连接(比如焊接)和NDE方面的认证服务。
最新消息：
Allgoods which previously required the CE marking will not need to use the UKCAmarkinguntil 1 January 2023.
Businesses are encouraged to be ready for full implementation of the new UK regime as soon as possible. However, to allow businesses time to adjust, CE marked goods in scope of this guidance that meet EU requirements (where these match UK requirements) can continue to be placed on the GB market until 1 January 2023 where EU and UK requirements remain the same. This includes goods which have been assessed by an EU recognised notified body.
The UKCA mark must be used for placing goods on the GB market from 1 January 2023.
You will still need to take action to ensure you comply with new importer responsibilities if you are placing a product on the GB market from the EU market.
#压力容器认证#
脱欧法案Act 2018 (TheEuropean Union ( Withdrawal) Act 2018) 确保所有欧盟的指令/法规仍保留在英国的法律内，比如承压设备安全法规 2016(Pressure Equipment (Safety)Regulations 2016).
The Product Safety and Metrologyetc. (Amendment etc.) (EU Exit) Regulations 2019增补修订了这些现有的法规以便落实由于脱欧后带来的一些变化。
●关于设计
相比PED，PER在对安全性(ESR)以及其它的技术要求方面没有变化。
但是PER采用了DesignatedStandard的叫法取代PED的HarmonizedStandard的叫法.
https://www.gov.uk/guidance/designated-standards
●关于材料
从2022年1月1日起，如果沿用体系认证模式的材料生产单位，其质量体系必须取得由在英国的认证机构认证批准。
●现有库存材料的处理？
●PER 2016 Part 4: 8 –“MaterialManufacturer to have an appropriate QA system certified by a competent bodyestablished in the UK”
●关于制造 - 焊接方面
在II,III 和IV类设备上使用的永久连接(比如焊接)的程序和施工人员，必须得到英国批准的认证机构或合格第三方批准。●●PER 2016 Part 3:21.(3) (a ) & ( b) :Permanentjoining procedures & personnel for Cat II,III & IV equipment to beapproved by a UK Approved Body or UK RTPO .
●关于制造 -NDE方面
在III 和IV类设备上做NDE探伤作业的人员，必须得到英国批准的认证机构或合格第三方批准。●●PER 2016 Part 3:22: Personnelperforming NDT for permanent joints in Cat III & IV equipment to be approved by a UK ApprovedBody or UK RTPO.
●劳氏(LRV-0038)可以提供永久连接(比如焊接)和NDE方面的认证服务。
最新消息：
Allgoods which previously required the CE marking will not need to use the UKCAmarkinguntil 1 January 2023.
Businesses are encouraged to be ready for full implementation of the new UK regime as soon as possible. However, to allow businesses time to adjust, CE marked goods in scope of this guidance that meet EU requirements (where these match UK requirements) can continue to be placed on the GB market until 1 January 2023 where EU and UK requirements remain the same. This includes goods which have been assessed by an EU recognised notified body.
The UKCA mark must be used for placing goods on the GB market from 1 January 2023.
You will still need to take action to ensure you comply with new importer responsibilities if you are placing a product on the GB market from the EU market.
#压力容器认证#
