steam上面的一些评价
So, despise what it says in the how long I used this application, I have been using this application for years. I have a Lenovo Explorer and the goggle is very good, no big complains about it other than moving the arms outside the field of view of the cameras, but the application to use it is almost literally trash.
所以,不管它说了什么 我使用这个应用程序多长时间,我已经使用这个应用程序多年了。我有一个联想 Explorer,护目镜非常好,除了将手臂移动到相机的视野之外之外,没有什么大的抱怨,但是使用它的应用程序几乎是垃圾。
These are the steps if you want to play with this application:
如果您想使用此应用程序,请按照以下步骤操作:
- Click the "Launch" button and almost like any other day, it doesn't launch.
- 点击 “Launch” 按钮,几乎像其他任何一天一样,它不会启动。
- You have to remove the wmr cable and re-attach it. Then this application hopefully will launches itself. If that doesn't work you have to restart your computer.
- 您必须拔下 wmr 电缆并重新连接。然后,此应用程序有望自行启动。如果这不起作用,您必须重新启动计算机。
- Once the application is launched, obviously, the first thing that you see, is advertisements about other things that you don't care.
- 显然,应用程序启动后,您首先看到的是有关您不关心的其他事物的广告。
- Close the advertisements so they know again that you don't care about buying other stuff.
- 关闭广告,以便他们再次知道您不在乎购买其他东西。
- Turn on all the lights in the room and check if the wmr boundaries are still saved after last time.
- 打开房间中的所有灯,并检查上次之后 wmr 边界是否仍然保存。
- No, they are not.
- 不,他们不是。
- Try going around the room 5-10 minutes with all the lights of the room on hoping that this application remembers your room.
- 尝试在房间的所有灯光下绕房间 5-10 分钟,希望此应用程序能记住您的房间。
- No, it doesn't. - 不,它没有。
- Go inside the application and check if you can reload somehow the boundaries by looking left, right and down.
- 进入应用程序,通过向左、向右和向下查看来检查是否可以以某种方式重新加载边界。
- No, you can not.
- 不可以。
- Re-configure the boundaries by turning on all the lights on in the room, or even empty the cache of the boundaries first, and go around the room.
- 通过打开房间中的所有灯来重新配置边界,甚至先清空边界的缓存,然后在房间内走动。
- Get near a mirror and lose completely and in an unrecoverable way the tracking done so far.
- 靠近镜子,以不可恢复的方式完全丢失到目前为止完成的跟踪。
- Re-configure AGAIN the boundaries by turning on all the lights on in the room, or even empty cache of the boundaries first, and go around the room.
- 通过打开房间中的所有灯,甚至先清空边界缓存,再次重新配置边界,然后在房间内走动。
- After the boundaries have been set up, go inside the application and be sure that the voice recognition is turned off otherwise weird things may happen while you are playing.
- 设置边界后,进入应用程序并确保语音识别已关闭,否则在您玩游戏时可能会发生奇怪的事情。
- Before you open a game, go back to the wmr application again and configure again your height because it doesn't save it since your last time you played. Obviously. Why would it.
- 在打开游戏之前,请再次返回 wmr 应用程序并再次配置您的身高,因为它不会保存您上次玩游戏后的高度。明显地。为什么会这样。
(You may not believe me but of all of this, the worst part is when you exit steamvr and wmr lighthouse opens up chugging your resources and there is absolutely nothing you can do.)
(你可能不相信我,但最糟糕的是,当你退出 SteamVR 并且 wmr lighthouse 打开你的资源时,你绝对无能为力。
As you can see after just a few steps you are ready to play any game you want.
如您所见,只需几个步骤,您就可以玩任何您想要的游戏。
Bear in mind, I am not joking nor exaggerating. I'm honest. It has been years that I have this same fight with this stupid application that is a requirement to play any game.
请记住,我不是在开玩笑,也不是夸大其词。老实说。多年来,我一直与这个愚蠢的应用程序进行同样的斗争,这是玩任何游戏的必要条件。
If you buy a WMR headset, I can tell you that you are going to be fine, but the worst part is this piece of s.....software.
如果你买了 WMR 耳机,我可以告诉你你会没事的,但最糟糕的是这块 s.....软件。 是否有价值? 是 否 欢乐 奖励有 20 人觉得这篇评测有价值
有 4 人觉得这篇评测很欢乐